Hydrological and Hydrodynamic Modeling for Flash Flood and Embankment Dam Break Scenario: Hazard Mapping of Extreme Storm Events

Simulation of dam breach scenarios can help in the preparation of emergency action plans for real dam breaks or flash flooding events. The purpose of this study was to identify flood-prone areas in the Al Wala Valley in the governorate of Madaba in Jordan through analysis of the Al Wala Dam. Modelling of dam breaches was conducted under two scenarios: a Clear Day scenario and a Probable Maximum Flood (PMF) scenario. The former scenario does not address the various dam failure modes; rather, it addresses the formation and development of a breach as a result of structural failures like the sliding of dam blocks in the case of a concrete dam or piping failures in the case of embankment dams. The PMF scenarios, however, simulate unsteady flow in pipes and overtopping failure via consideration of runoff hydrography. In the PMF scenario, flood-prone areas can be identified by in-depth analysis of data from previous extreme rainfall events. The related hydrologic and hydraulic data can then be modelled using intensity-duration-frequency curves applied to an hour-by-hour simulation to discover the areas most at risk of flooding in the future. In the present study, data were collected from inlet of flow to Al Wala Valley on 10 January 2013. The collected data, which included rainfall and discharge data, were fed to the HEC-HMS software in order to calibrate the hydrological parameters of the watershed of the Al Wala Dam. Additionally, the HEC-RAS tool was employed to determine the breach outflow hydrography and hydraulic conditions across various critical downstream locations, which were determined by use of dynamic flood wave